Skip to Content

How to Easily Drain Gas from Your Lawn Mower: A Beginner’s Guide


Welcome to our guide on how to drain gas from a lawn mower. Draining gas from a lawn mower is an important maintenance task that should be performed at least once every season. If you don’t drain the gas, it can lead to clogging of the fuel system, which can cause the engine to stall or not start at all. In this article, we’ll guide you through the process of draining gas from a lawn mower, step by step.

Understanding the importance of draining gas is crucial to maintaining the performance of your lawn mower. Old or stale gas can cause the engine to run poorly or not start at all. It can also lead to clogging of the fuel system and carburetor, which can be expensive to repair. Draining the gas from your lawn mower is an easy and inexpensive way to prevent these problems from occurring.

Before we get into the step-by-step process of draining gas from a lawn mower, it’s important to take some safety precautions. Make sure to wear gloves and eye protection when handling gasoline. Also, work in a well-ventilated area away from any sources of ignition, such as open flames or sparks. With safety in mind, let’s get started.

Key Takeaways

  • Draining gas from a lawn mower is an important maintenance task that should be performed at least once every season.
  • Safety precautions should be taken when handling gasoline, including wearing gloves and eye protection and working in a well-ventilated area away from any sources of ignition.
  • The process of draining gas from a lawn mower involves preparing the mower, draining the gas using a siphon or without a siphon, cleaning the fuel system, dealing with contaminated gasoline, and refilling with fresh fuel.

Understanding the Importance of Draining Gas

If you own a lawn mower, it’s important to understand the importance of draining gas from it. When gasoline sits in the tank for an extended period, it can deteriorate and cause problems with your lawn mower’s engine.

One of the main reasons to drain gas from your lawn mower is to prevent corrosion and rusting. Gasoline can be corrosive to metal parts, and when it sits in the tank for too long, it can cause rust to form. This can lead to a host of problems, including clogged fuel lines, carburetor issues, and even engine failure.

Another reason to drain gas from your lawn mower is to winterize it. If you’re planning on storing your lawn mower for the winter, it’s essential to drain the gas to prevent it from deteriorating and causing problems when you try to start it up again in the spring.

Bad gasoline is another reason to drain gas from your lawn mower. Gasoline can go bad over time, and if you leave it in your lawn mower for too long, it can cause problems with the engine. Bad gasoline can cause your lawn mower to run poorly, and in some cases, it can even cause the engine to fail.

In conclusion, draining gas from your lawn mower is an essential step in maintaining its longevity and performance. It’s important to understand the reasons why you need to drain the gas, including preventing corrosion and rusting, winterizing, and avoiding bad gasoline. By taking the time to drain the gas properly, you can ensure that your lawn mower runs smoothly and efficiently for years to come.

Safety Precautions

When dealing with gasoline, it is important to take the necessary safety precautions to prevent accidents and injuries. Here are some simple steps you can follow to ensure a safe and successful gas draining process.

Protective Gear

Before starting the gas draining process, it is important to wear proper protective gear. Gloves are essential to protect your hands from gasoline and other chemicals. Protective eyewear is also recommended to prevent any accidental splashes or spills from getting into your eyes.

Working in a Well-Ventilated Area

Gasoline fumes can be harmful if inhaled in large quantities. Therefore, it is important to work in a well-ventilated area when draining gas from your lawn mower. Open the garage door or work outside in an open space to ensure proper ventilation.

Accidental Start

To prevent accidental start, make sure to disconnect the spark plug wire before beginning the gas draining process. This will ensure that the engine does not start accidentally and cause harm.

By following these simple safety precautions, you can ensure a safe and successful gas draining process. Remember to always prioritize your safety and take the necessary steps to avoid accidents and injuries.

Tools and Materials Required

Draining gas from a lawn mower is a simple task that can be accomplished with just a few tools and materials. Here’s what you’ll need:

Tools Required

  • Pliers
  • Screwdriver
  • Wrench

Materials Required

  • Siphon or pump
  • Tubing
  • Drain pan

A siphon or pump is necessary to remove the gas from the lawn mower. A siphon pump is a simple and inexpensive tool that can be purchased at most hardware stores. A transfer pump or fuel transfer pump can also be used if you have one available.

Tubing is needed to connect the siphon or pump to the lawn mower’s gas tank. The tubing should be long enough to reach from the gas tank to the drain pan.

A drain pan is necessary to catch the gas as it is removed from the lawn mower. A large plastic container or oil drain pan will work well.

In addition to these tools and materials, it’s important to wear gloves and safety glasses to protect your hands and eyes from any gasoline spills or splashes. With these items on hand, you’ll be ready to drain the gas from your lawn mower quickly and safely.

Preparation Steps

Before draining gas from a lawn mower, you need to take some preparation steps to ensure that the process goes smoothly. Here are the steps you should follow:

Disconnecting the Spark Plug

The first step is to disconnect the spark plug. This is important to prevent any accidental ignition while you are draining the gas. To do this, locate the spark plug wire and pull it off the spark plug. You may need to use pliers to do this. Once the spark plug wire is disconnected, secure it away from the spark plug to prevent it from accidentally reconnecting.

Opening the Fuel Tank Cap

The next step is to open the fuel tank cap. This will allow air to enter the tank, which will help the gas flow out smoothly. Before you do this, make sure the lawn mower is on a level surface and the fuel tank cap is clean. Use a rag to wipe away any dirt or debris around the cap. Then, slowly unscrew the cap and set it aside in a safe place.

Once you have disconnected the spark plug and opened the fuel tank cap, you are ready to drain the gas from your lawn mower.

Draining Gas Using Siphon Method

If you need to drain gas from your lawn mower, a siphon method can be a quick and easy way to do it. Here’s how to do it:

  1. First, gather your materials. You’ll need a siphon, which is a tube that allows liquid to flow from one container to another using gravity, a pump, or suction. You’ll also need tubing that fits snugly over the siphon, a drain pan to catch the gas, and a safe disposal method for the gas.

  2. Next, insert one end of the tubing into the gas tank of your lawn mower and the other end into the drain pan. Make sure the tubing is securely attached to both the siphon and the gas tank.

  3. Once the tubing is securely attached, start the siphon by either using gravity or suction. If using gravity, make sure the drain pan is lower than the gas tank. If using suction, you can use a pump to start the flow of gas.

  4. Watch the gas flow into the drain pan. Once the gas has drained, remove the tubing from the gas tank and dispose of the gas properly.

It’s important to note that using a siphon method can be dangerous if not done correctly. Always make sure to follow proper safety precautions and dispose of the gas properly. Additionally, make sure to use a siphon that is specifically designed for transferring gasoline to avoid any potential hazards.

Overall, draining gas using a siphon method can be a quick and easy way to empty the gas tank of your lawn mower. Just be sure to take the necessary safety precautions and properly dispose of the gas.

Draining Gas Without a Siphon

If you don’t have a siphon, don’t worry! There are other ways to drain gas from your lawn mower. Here are a few methods you can try:

Non-Siphon Method

One way to drain gas without a siphon is to use a hand pump. You can find these pumps at most hardware stores. To use a hand pump, follow these steps:

  1. Disconnect the spark plug wire to prevent accidental starting.
  2. Locate the gas tank and disconnect the fuel line.
  3. Insert the hand pump into the gas tank and begin pumping.
  4. Pump until all the gas has been removed from the tank.

Draining Gas Without a Siphon

Another way to drain gas without a siphon is to use a turkey baster or a syringe. Here’s how to do it:

  1. Disconnect the spark plug wire to prevent accidental starting.
  2. Locate the gas tank and remove the cap.
  3. Insert the turkey baster or syringe into the tank and begin suctioning the gas.
  4. Once you have removed all the gas, dispose of it properly.

Pressure Difference

You can also use a pressure difference to drain gas without a siphon. Here’s how:

  1. Disconnect the spark plug wire to prevent accidental starting.
  2. Locate the gas tank and remove the cap.
  3. Insert a small tube into the tank and blow air into it.
  4. This will create a pressure difference and force the gas out of the tank and into your container.

Remember to always dispose of the gas properly and never pour it down the drain or into the soil. These methods should help you safely and effectively drain gas from your lawn mower without a siphon.

Cleaning the Fuel System

Regular maintenance of your lawn mower’s fuel system is essential to keep it running smoothly. Over time, dirt, debris, and old fuel can build up in the fuel line and carburetor, causing your mower to run poorly or even fail to start. In this section, we’ll go over how to clean the fuel line and carburetor to keep your lawn mower running like new.

Cleaning the Fuel Line

The fuel line is responsible for delivering fuel from the tank to the carburetor. Over time, the fuel line can become clogged with dirt and debris, causing the engine to run poorly or not start at all. To clean the fuel line, follow these steps:

  1. Turn off the engine and disconnect the spark plug wire.
  2. Locate the fuel line and detach it from the carburetor.
  3. Use a clean rag to wipe away any dirt or debris from the outside of the fuel line.
  4. Use a vacuum to remove any dirt or debris from the inside of the fuel line.
  5. Reattach the fuel line to the carburetor.

Cleaning the Carburetor

The carburetor is responsible for mixing air and fuel in the correct proportions for combustion. Over time, the carburetor can become clogged with dirt and debris, causing the engine to run poorly or not start at all. To clean the carburetor, follow these steps:

  1. Turn off the engine and disconnect the spark plug wire.
  2. Locate the carburetor and detach it from the engine.
  3. Use a clean rag to wipe away any dirt or debris from the outside of the carburetor.
  4. Use carburetor cleaner to remove any dirt or debris from the inside of the carburetor.
  5. Reattach the carburetor to the engine.

Other Considerations

In addition to cleaning the fuel line and carburetor, it’s also important to replace the air filter regularly. A dirty air filter can restrict airflow to the engine, causing it to run poorly. Check your owner’s manual for instructions on how to replace the air filter.

Finally, it’s important to use the correct type of fuel for your lawn mower. Using the wrong type of fuel can cause damage to the engine and fuel system. Check your owner’s manual for the recommended type of fuel for your lawn mower.

By following these simple steps, you can keep your lawn mower’s fuel system clean and running smoothly for years to come.

Dealing with Contaminated Gasoline

Contaminated gasoline can cause a lot of problems for your lawn mower, including clogging the fuel filter and leaking. It’s important to take care of this issue as soon as possible to avoid more significant damage to your lawn mower.

The following are some steps you can take to deal with contaminated gasoline:

  1. Identify the problem: If your lawn mower is not starting, or it’s running poorly, it could be due to contaminated gasoline. If you notice any debris or discoloration in the gasoline, it’s a clear indication that it’s contaminated.

  2. Drain the gasoline: The first step is to drain the contaminated gasoline from your lawn mower. You can do this by using a hand pump or siphon pump. Make sure you have a container to hold the gasoline.

  3. Replace the fuel filter: Once you have drained the contaminated gasoline, replace the fuel filter. A clogged fuel filter can cause many problems, including a lack of power and stalling. It’s important to replace the fuel filter regularly to avoid any issues.

  4. Refill with fresh gasoline: After you have replaced the fuel filter, refill the tank with fresh gasoline. Make sure to use the recommended type of gasoline for your lawn mower.

  5. Check for leaks: Finally, check for any leaks. Contaminated gasoline can cause damage to the fuel lines, so it’s important to check for any leaks and repair them if necessary.

Dealing with contaminated gasoline can be a hassle, but it’s essential to keep your lawn mower running smoothly. By following these steps, you can avoid more significant damage to your lawn mower and ensure it’s running at its best.

Refilling with Fresh Fuel

After draining the old gas from your lawn mower, it’s time to refill it with fresh fuel. Here are some tips to ensure that your lawn mower runs smoothly:

  • Use fresh fuel: Always use fresh fuel for your lawn mower. Gasoline can start to break down after a few months, which can cause problems with your lawn mower’s engine. Therefore, it’s important to use fresh fuel to avoid any issues.

  • Fuel stabilizer: If you’re going to store your lawn mower for an extended period, consider using a fuel stabilizer. Fuel stabilizers can help keep the gasoline fresh for up to a year. This is especially important if you live in an area with seasonal lawn care.

  • Filling the tank: When refilling the tank, make sure to fill it to the appropriate level. Overfilling the tank can cause problems with the engine, while underfilling it can cause the engine to run poorly.

  • Check the fuel type: Make sure you’re using the correct type of fuel for your lawn mower. Some lawn mowers require a specific type of fuel, such as ethanol-free gasoline.

  • Fuel fresh: Consider using a fuel fresh product to help keep your fuel fresh and prevent problems with your lawn mower’s engine. These products can help prevent gum and varnish buildup, which can cause problems with the carburetor.

By following these tips, you can ensure that your lawn mower is running smoothly and efficiently. Remember to always use fresh fuel and consider using a fuel stabilizer or fuel fresh product if you’re going to store your lawn mower for an extended period.

Additional Tips for Winterization

When winterizing your lawn mower, there are a few additional tips that can help ensure your machine is protected during the colder months.

Fuel System

One important step is to drain the fuel system completely. This means removing any remaining gasoline from the tank and carburetor. Leaving fuel in the system can cause it to break down and create a gummy residue that can clog the carburetor. To do this, run the engine until it runs out of gas and then disconnect the fuel line. This will allow any remaining fuel to drain out.

Vents

Another important step is to check and clean any vents on your lawn mower. Vents can become clogged with debris and prevent air from flowing through the system. This can cause problems with starting the engine and can also lead to overheating. Make sure to clean any vents and ensure they are free of debris.

Winter Storage

When storing your lawn mower for the winter, it is important to find a dry and cool place to store it. Exposure to moisture and extreme temperatures can cause damage to the engine and other parts. Consider storing your lawn mower in a garage or shed where it will be protected from the elements.

Briggs and Stratton

If you have a Briggs and Stratton engine, it is important to follow the manufacturer’s recommendations for winterizing. This may include using a fuel stabilizer, changing the oil, and removing the spark plug. Check your owner’s manual for specific instructions.

Small Engines

Finally, if you have other small engines, such as those on a snow blower or generator, make sure to winterize them as well. Follow the manufacturer’s recommendations for each machine and make sure to drain the fuel system completely.

By following these additional tips, you can help ensure that your lawn mower and other small engines are protected during the winter months.

Conclusion

In conclusion, draining gas from a lawn mower is an essential maintenance task that should be done at the end of each mowing season or when the mower will be unused for an extended period. The process is straightforward and can be completed in a few simple steps.

To drain gas from a lawn mower, you will need a few tools such as a container to hold the gas, a pair of pliers, a funnel, and a clean cloth. First, ensure that the mower is turned off and cooled down. Next, locate the gas tank and remove the gas cap. Use the pliers to detach the fuel line from the carburetor, and then allow the gas to flow into the container.

It is essential to ensure that you dispose of the old gas correctly. Gasoline is a hazardous substance and should not be disposed of in the trash or poured down the drain. Instead, take it to a hazardous waste disposal site or a service station that accepts old gas.

By draining gas from your lawn mower, you will prevent damage to the engine and carburetor, and ensure that your mower runs smoothly when you need it. Remember to replace the gas filter and spark plug at the beginning of each mowing season to keep your mower in top condition.

In summary, draining gas from a lawn mower is a simple and essential maintenance task that can save you time and money in the long run. By following the steps outlined in this guide, you can ensure that your mower runs smoothly and efficiently for years to come.

Frequently Asked Questions

How do you get gas out of a lawn mower without siphon?

If you don’t have a siphon, you can use a turkey baster or a hand pump to remove gas from your lawn mower. Simply insert the baster or pump into the gas tank and squeeze or pump until all the gas is removed.

How do you get water out of a gas tank on a lawn mower?

If you suspect that there is water in your lawn mower’s gas tank, the best thing to do is to drain the tank completely. You can remove the gas tank and empty it, or use a hand pump or siphon to remove the gas. Once the tank is empty, you can inspect it for water and clean it out if necessary.

Should I drain gas from lawn mower?

If you’re storing your lawn mower for an extended period of time, it’s a good idea to drain the gas tank. Old gas can clog your carburetor and cause problems with starting your mower. If you’re not sure how long you’ll be storing your mower, it’s best to err on the side of caution and drain the gas.

How do I empty my gas tank?

To empty your gas tank, you can either remove the tank and pour the gas out, or use a hand pump or siphon to remove the gas. Be sure to dispose of the gas properly, as it can be hazardous.

How to drain gas from briggs and stratton lawn mower?

To drain gas from a Briggs and Stratton lawn mower, you can follow these steps:

  1. Turn off the engine and let it cool down.
  2. Locate the gas tank and remove the cap.
  3. Tilt the mower so that the gas flows into a container.
  4. Once all the gas has been drained, replace the cap and dispose of the gas properly.

How to flush lawn mower gas tank?

To flush your lawn mower’s gas tank, you can follow these steps:

  1. Remove the gas tank from the mower.
  2. Fill the tank with a mixture of half gas and half water.
  3. Shake the tank vigorously to mix the gas and water.
  4. Pour the mixture out of the tank and dispose of it properly.
  5. Repeat the process until the tank is clean.
  6. Allow the tank to dry completely before refilling with gas.